core – "Bold Flight"

January 7, 2018January 9, 2018

Repairing fiberglass fuckups

Poor job done by the “professional” we hired resulted cracks as soon as some pressure was put on cabin top during beam installation.

Grinding teeth while grinding off fresh paint and non-skid

As suspected, the cracks are along the edges of repaired areas

There is still wet core in there

Strengthening with some cloth

Helping epoxy cure in the cold weather with a heat gun

December 10, 2017December 11, 2017

Fortifying the mast base

Holes for G10 rods

Putting rods in before covering with 1/4″ G10 plates

December 9, 2017December 11, 2017

More rotten core exposed

November 23, 2017November 25, 2017

The core is the issue

Searching for the edge of bad core

Ugly core

Wet & mushy

Removing core